Automatic 32mm polyester strapping machine for the circumferential strapping of coils. This machine is installed in a production plant.
This strapping machine does the strapping in automatic mode.
Firstly, it is necessary to introduce the strapping parameters into the control panel of the Strapping Machine. Once the strapping process is programmed, The Strapping Machine starts to carry out circumferential strapping in different measurements according to the indications received. In order to carry out circumferential strapping, the Strapping Machine approaches the coils, performs the strapping and when it has finished all circumferential strapping, the Strapping Machine returns to its starting point.
The machine performs the 32mm polyester strapping and the joint is by friction-vibration, guaranteeing the customer a resistance of 80% of the breaking load of the strap.
This machine can do the strapping of coils with an outside diameter from 600mm to 2200mm. The strapping head and the strapping machine moves to do the strapping of the coils of a diameter or another. It is also possible to adjust the machine so you can strap interchangeably with 32mm steel strap. |
 |
|
The tensor of the head can tighten the strip against the coil to the desired pressure by the customer. This tensor can be regulated by the operator according to the characteristics of the coil you want to strap.
In this video the image is reproduced in slow motion so that the customer can see the strapping movements more clearly. This machine is capable to perform each strapping in just 16 seconds
The strapping machine is tailored to the needs and / or limitations that may have the client, such as the space. The 32mm polyester strap makes possible to replace in almost all the applications the steel strap, which until now was necessary. |
|
|
