Automatic strapping machine with lateral movement for the radial strapping of coils
Firstly, it is necessary to introduce the strapping parameters into the control panel of the Strapping Machine. Once the strapping process is programmed, The Strapping Machine starts to carry out radial strapping of the coil that is ready for strapping. This Strapping Machine has lateral movement so that the coils in position can be strapped. When it has finished all radial strapping, the Strapping Machine will return to the starting point.
Clamping carried out with the steel strap uses engraving and it can hold a load of up to 3000 kg per strapping. Depending on the characteristics of the coil that requires strapping, this Strapping Machine is designed so that it can strap with 32 mm polyester strapping. The sealing made by the Strapping Machine with the polyester strapping is through engraving and friction simultaneously.
The tightening device of the strap head can tighten the package to the tension required by the client. This device can be regulated by the operator in accordance with the package to be strapped.
This Strapping Machine can strap coils of different sizes easily.
Barely needs 14 seconds for each strapping.
Strapping machine at strapping position.
Side view of strapping machine at strapping position.
Strapping machine at strapping position of the last coil.
