» Home » Automatic strapping machines » Automatic 32 m steel and polyester strapping machine for strapping sections bar and tubes Automatic 32 m steel and polyester strapping machine for strapping sections bar and tubes Firstly, it is necessary to introduce the strapping parameters into the control panel of the Strapping Machine. Once the strapping process is programmed, the Strapping Machine starts to strap the section bar, tube package etc. that are ready for strapping. The Strapping Machine is at a fixed point and its strap head has vertical movement towards the package to be strapped. The package moves on the roller table and the Strapping Machine carries out all of the strapping in accordance with the parameters indicated in the control panel. Clamping carried out with the steel strap uses engraving and it can hold a load of up to 3000 kg per strapping. Depending on the characteristics of the coil that requires strapping, this Strapping Machine is designed so that it can strap with 32 mm polyester strapping. The sealing made by the Strapping Machine with the polyester strapping is through engraving and friction simultaneously. The tightening device of the strap head can tighten the package to the tension required by the client. This device can be regulated by the operator in accordance with the package to be strapped. This Strapping Machine can strap section bars, tubes, etc. of different sizes easily. This machine is capable of carrying out a strapping in 12 seconds. Strapping machine at strapping position with steel and polyester strap Strap head at strapping position General view of strapping machine 32 mm strapping machine Strapping with polyester strap   Package strapped with steel and polyester strap   32 mm strap head of steel strap   Strapping machine for packages Package strapped with steel strap   Strapping a package of paper paste   32 mm strapping machine with steel strap for paper paste   General view of test bench