Automatic 19 mm steel and polyester radial strapping of coils

» Home » Automatic strapping machines » Automatic 19 mm steel and polyester radial strapping of coils

Firstly, it is necessary to introduce the strapping parameters into the control panel of the Strapping Machine. Once the strapping process is programmed, The Strapping Machine starts to carry out the strapping of the coil that is ready for strapping. This Strapping Machine is at a fixed point and its strap head has vertical movement towards the coil to be strapped. The coil moves on the roller table and this coil is suspended by a centring belt so that the Strapping Machine can carry out the corresponding radial strapping. Once the first radial strapping is carried out, the coil rotates automatically and it is ready for the next strapping. Once the coil is strapped, the coil moves laterally to the end of the roller table.

Clamping carried out with the steel strap uses engraving and it can hold a load of up to 1600 kg per strapping. Depending on the characteristics of the coil that requires strapping, this Strapping Machine is designed so that it can strap with 19 mm polyester strapping. The sealing made by the Strapping Machine with the polyester strapping is through engraving and friction simultaneously.

The tightening device of the strap head can tighten the package to the tension required by the client. This device can be regulated by the operator in accordance with the package to be strapped.

This Strapping Machine can strap section bars, tubes, etc. of different sizes easily.

This machine is capable of carrying out a strapping in 12 seconds.